U.S. Army Research Laboratory
Label
U.S. Army Research Laboratory
Name
U.S. Army Research Laboratory
Actions
Incoming Resources
- Standoff variation study II, detonation of a donor munitions stack and responses of a thin rectangular water barricade and an acceptor stack, Richard E. Lottero
- Laser ignition in a medium-caliber gun, a study of igniter influence on action time, Richard A. Beyer, John M. Hirlinger
- Shot-peening sensitivity of aluminum with corrosion-preventive coatings, Scott Grendahl and Daniel Snoha
- Ku-band radio frequency microelectromechanical system enabled electronically scanned antenna, Ronald G. Polcawich ... [and others]
- Fabrication and characterization of Schottky diodes using single wall carbon nanotubes, by Brandon E. Luquette and Barbara M. Nichols
- Theory and operation of cold field-effect transistor (FET) external parasitic parameter extraction, by Benjamin D. Huebschman, Pankaj B. Shah, and Romeo Del Rosario
- A process-oriented nuts and bolts tutorial for implementing manpower and personnel integration (MANPRINT) evaluations, by Otto H. Heuckeroth
- Characterizing the turbulent wind flow near a wind barrier using a data set collected with an array of sonic anemometers, by Yansen Wang ... [et al]
- Review of ultrasound performance from 5 to 20 MHz on an aluminum standard, by Raymond E. Brennan and James M. Sands
- Workload and stress of crews operating future manned vehicles, Bruce S. Sterling and Chuck H. Perala, Stephen F. Blaske
- IMPRINT analysis of an unmanned air system geospatial information process, Bruce P. Hunn ... [and others]
- Implementation of SEREP into LLNL Dyna3d for global/local analysis, David A. Hopkins and Michael A. Minnicino II
- Failure analysis of OH-58 Kiowa Warrior drive gear shafts, Scott Grendahl, Victor Champagne, and Dan Snoha ; prepared by U.S. Army Research Laboratory, Weapons and Materials Research Directorate for U.S. Army Research, Development, and Engineering Command, Aviation Engineering Directorate, Propulsion Division
- Interval estimates for probabilities of non-perforation derived from a generalized pivotal quantity, by David W. Webb
- The state of remote scientific visualization providing local graphics performance to remote ARL MSRC users, by John M. Vines and Claude Sandroff
- Procedures for using the AMANDA model in acceleration response studies (tutorial by example), Owen P. Litt
- Evaluation of an army aviator's ability to conduct ingress and egress of the RAH-66 Comanche crew station while wearing the air warrior ensemble, Joshua S. Kennedy ... [and others]
- Characterization techniques employed to determine the energy release of reactive materials, John J. Ritter .. [and others]
- Numerical simulations of supersonic flow over an elliptic projectile with jet interaction, Jubaraj Sahu
- Solider machine interface for vehicle formations, interface design and an approach evaluation and experimentation, Keryl A. Cosenzo ... [and others]
- A transferable intermolecular potential for nitramine crystals, by Dan C. Sorescu, Betsy M. Rice, and Donald L. Thompson
- Simulating collision avoidance by a reactive agent using VRML, Andrew Neiderer
- A simple data logging system for ballistic applications, Thomas Kottke
- Dynamic pressure testing of a 155-mm howitzer ballistic window using a closed bomb vessel, John J. Ritter, Barrie E. Homan, and William Thalman
- Carbon nanotube aluminum matrix composites, Brent J. Carey, Jerome T. Tzeng, and Shashi Karna
- Forecast model uncertainty, MM5 accuracy over Utah, by Barbara Sauter
- Prototype of a coupled mesoscale-microscale modeling system, by Saba A. Luces and Ronald M. Cionco
- Improvements in the omni-directional treadmill, summary report and recommendations for future development, by Harrison P. Crowell III ... [and others]
- Comparison of electromagnetic simulation results with experimental data for an aperture-coupled C-band patch antenna, by Steven Keller ... [and others]
- Numerical methods for analysis of charged vacancy diffusion in dielectric solids, by John D. Clayton ... [and others]
- Model of high-energy-density battery based on SiC Schottky diodes, by Yves Ngu, Marc Litz, and Bruce Geil
- Performance and evaluation of bipolar fuel cell stacks, Deryn Chu ... [and others]
- On the flame structure of RDX, Barrie E. Homan, Martin S. Miller, and John A. Vanderhoff
- Failure analysis, cadmium brush plate qualification and salt fog testing of the AH-64 shock strut mount, P/N 7-311113409, Marc Pepi
- Thermal and environmental barrier coating development for advanced propulsion engine systems, Dongming Zhu, Robert A. Miller and Dennis S. Fox ; prepared for the 48th Structures, Structural Dynamics, and Materials Conference sponsored by the AIAA, ASME, ASCE, AHS, and ASC Waikiki, Hawaii, April 23-26, 2007
- Attitude determination with magnetometers for gun-launched munitions, Michael J. Wilson
- Electrothermal-chemical (ETC) closed-chamber interrupted-burning tests with JA2 and M30 solid propellants, Avi Birk ... [and others]
- A framework of automation use, Mary T. Dzindolet ... [and others]
- Spreadsheet proof of arguments, John D. Sullivan
- Hot-metal simulating igniter for in-bed thermal initiation of granular charges, by Stephen L. Howard
- Induction bonding for structural composite tubes, by Eric D. Wetzel, William A. Spurgeon, and Christian J. Yungwirth
- Observation of an ultrahard phase of graphite quenched from high-pressure, Jennifer A. Ciezak-Jenkins
- Gateway portal, Marlon Pierce and Stephen Wilkerson
- Prediction of the formulation dependence of the glass transition temperature for amine-epoxy copolymers using a quantitative structure-property relationship based on the AM1 method, Jason A. Morrill ... [and others]
- Response characteristics of active scattering aerosol spectrometer probes made by particle measuring systems, by Ronald G. Pinnick, J. David Pendleton, and Gorden Videen
- A comparison of various methods used to determine the sample size requirements for meeting a 90/90 reliability specification, David W. Webb
- Carbon nanotube and graphene based supercapacitors, rationale, status, and prospects, Matthew H. Ervin
- Physics-based modeling of a graphene-loaded capacitor, Frank J. Crowne
- Thermally stable nanometals by predictive atomic scale interfacial energy reduction, Kris Darling ... [and others]
- A comprehensive approach to characterizing the hazards of explosive countermeasures with respect to dismounted troops, Patricia S. Frounfelker, Stephen P. Swann, and Gregory K. Dietrich
- Creator of2
- Focus of1
- inverse.issuingbody25
- Minority carrier lifetime and interfacial recombination velocity in GaAs/AlGaAs double heterostructures, P.A. Folkes and B. Connelly, F. Towner
- Excitation spectroscopy of Er³+-doped [alpha]-Al₂O₃ nanopowder and ceramic, T. Sanamyan [and three others]
- Automated policy-based asset cuing using SQLite, Jesse Kovach and Robert Walker
- Detection of a ferromagnetic microwire, Frank J. Crowne
- Surface characteristics of etched and non-etched silicon germanium (SiGe)/Si graded structure with varying Ge concentration grown by ultra-high vacuum (UHV)/chemical vapor deposition (CVD) for optoelectronic and power conversion applications, Fred Semendy [and three others]
- Catalytic partial oxidation of isobutanol for the production of hydrogen, Jeffrey G. St. Clair, Ivan C. Lee, and Adam S. Gamson
- Developing signal processing blocks for software-defined radios, Gunjan Verma and Paul Yu
- Framework for a software-defined Global Positioning System (GPS) receiver for precision munitions applications, Mark Ilg
- Branched polymers for enhancing polymer gel strength and toughness (final report), Robert H. Lambeth [and four others]
- Computing Optic Flow with ArduEye vision sensor, by Kathryn Schneider, Dr. Joseph Conroy, and Dr. William Nothwang
- Establishing an experimental testbed with software-defined radios, Gunjan Verma and Paul Yu
- Holography at the U.S. Army Research Laboratory, creating a digital hologram, Karl K. Klett, Jr., Neal Bambha, and Justin Bickford
- Assessing the applicability of digital image correlation (DIC) technique in tensile testing of fabric composites, Brian P. Justusson, David M. Spagnuolo, and Jian H. Yu
- Modeling and design of mixed-coherence optical stacks, William Beck
- MSM-metal semiconductor metal photo-detector using black silicon germanium (SiGe) for extended wavelength near infrared detection, Fred Semendy [and three others]
- Time-dependent modeling of brillouin scattering in passive optical fibers pumped by chirped diode laser, Jeffrey O. White, Steven D. Rogers, and Carl E Mungan
- LAMPAT and LAMPATNL user's manual, Jeffrey M. Staniszewski and Travis A. Boggetti
- Altering plasmonic nanoparticle size through thermal annealing for improved photovoltaic devices, Rukshan Fernando, Fred Semendy and Priyalal Wijewarnasuriya
- Penetration of a highly oblique steel plate by a thin disk, Nathaniel Bruchey and Kent Kimsey
- Temperature behavior of thin film varactor, Richard X. Fu
- Through the wall radar simulations using polarimetric antenna patterns, Traian Dogaru and Calvin Le
- Remote station user's guide, John T. Clark
- Noncircular gears, geometry and visualization MODEL development, David "Blake" Stringer
- Chemical compound design using nuclear charge distributions, B. Christopher Rinderspacher
- Evaluation of a high resolution wind model over a complex terrain surface, by Sam S. Chang [and three others]
- inverse.sponsoringbody1