Incoming Resources
- A summary of unmanned aircraft accident/incident data, human factors implications, Kevin Williams
- Small Aircraft Transportation System simulation analysis of the HVO and ERO concepts, Gary D. Millsaps
- Helical face gear development under the Enhanced Rotorcraft Drive System Program, Gregory F. Heath ... [and others]
- Performance characterization of Loctite® 242 and 271 liquid locking compounds (LLCs) as a secondary locking feature for International Space Station (ISS) fasteners, Michael J. Dube, Wayne R. Gamwell
- Peer review of launch environments, Timmy R. Wilson
- Relating cohesive zone model to linear elastic fracture mechanics, John T Wang
- Simplification of fatigue test requirements for damage tolerance of composite interstage launch vehicle hardware, A.T. Nettles, A.J. Hodge, and J.R. Jackson
- Gear mesh loss-of-lubrication experiments and analytical simulation, Robert F. Handschuh, Joseph Polly, and Wilfredo Morales
- Investigation of tapered roller bearing damage detection using oil debris analysis, Paula J. Dempsey, Gary Kreider and Thomas Fichter ; prepared for the 2006 Aerospace Conference sponsored by the Institute of Electrical and Electronics Engineers Big Sky, Montana, March 4-11, 2006
- Possible deficiencies in predicting transonic aerodynamics on the X-43A, Steven G. Labbe, Michael G. Gilbert, Michael W. Kehoe
- User-defined material model for progressive failure analysis, Norman F. Knight, Jr
- Adaptive control in the presence of simultaneous sensor bias and actuator failures, Suresh M. Joshi
- Evaluation of Acoustic Emission NDE of Composite Crew Module Service Module/Alternate Launch Abort System (CCM SM/ALAS) test article failure Tests, Michael R. Horne, Eric I. Madaras
- Lead-free experiment in a space environment, J.F. Blanche, S.M. Strickland
- Finite element model for failure study of two-dimensional triaxially braided composite, Xuetao Li and Wieslaw K. Binienda, Robert K. Goldberg
- Effects of a high mean stress on the high-cycle fatigue life of PWA 1480 and correlation of data by linear elastic fracture mechanics, by S. Majumdar and R. Kwasny
- Three-dimensional computed tomography as a method for finding die attach voids in diodes, E.N. Brahm, T.D. Rolin
- Elements of engineering excellence, J.C. Blair, R.S. Ryan, and L.A. Schutzenhofer
- Dwell notch low cycle fatigue behavior of a powder metallurgy nickel disk alloy, J. Telesman [and four others]