National Aeronautics and Space Administration, Glenn Research Center, Cleveland, Ohio, 2005
Date
2005
Label
National Aeronautics and Space Administration, Glenn Research Center, Cleveland, Ohio, 2005
Name
National Aeronautics and Space Administration, Glenn Research Center
Place
Cleveland, Ohio
Provider place
Incoming Resources
- 2004 NASA Seal/Secondary Air System workshop, proceedings of a conference held at Ohio Aerospace Institute sponsored by NASA Glenn Research Center, Cleveland, Ohio November 9-10, 2004
- Shape Changing Airfoil, Eric A. Ott
- An experimental investigation of the influence of the lubricant viscosity and additives on gear wear, Timothy L. Krantz, Ahmet Kahraman
- Approximate micromechanics treatise of composite impact, Christos C. Chamis and Louis M. Handler
- Modeling and development of a magnetic bearing controller for a high speed flywheel system, Timothy P. Dever ... [and others]
- Completed Beltrami-Michell formulation in polar coordinates, Surya N. Patnaik, Dale A. Hopkins
- Reaction control system thruster cracking consultation, NASA Engineering and Safety Center (NESC) Materials Super Problem Resolution Team (SPRT) findings, Rebecca A. MacKay ... [and others]
- Adopting internet standards for orbital use, Lloyd Wood ... [and others] ; prepared for the 19th Annual Conference on Small Satellites cosponsored by the American Institute of Aeronautics and Astronautics and Utah State University, Logan, Utah, August 8-11, 2005
- Meeting the challenges of exploration systems, health management technologies for aerospace systems with emphasis on propulsion, Kevin J. Melcher, T. Shane Sowers and William A. Maul ; prepared for the First International Forum on Integrated System Health Engineering and Management in Aerospace sponsored by NASA Ames Research Center and NASA Marshall Space Flight Center, Napa, California, November 7-10, 2005
- Performance and mass modeling subtleties in closed-Brayton-cycle space power systems, Michael J. Barrett, Paul K. Johnson ; prepared for the Third International Energy Conversion Engineering Conference sponsored by the American Institute of Aeronautics and Astronautics. San Francisco, California, August 15-18, 2005
- Overview of advanced electromagnetic propulsion development at NASA Glenn Research Center, Eric J. Pencil ... [and others] ; prepared for the 41st Joint Propulsion Conference and Exhibit, cosponsored by the AIAA, ASME, SAE, and ASEE, Tucson, Arizona, July 10-13, 2005
- Near-field noise computation for a supersonic circular jet, Ching Y. Loh, Lennart S. Hultgren ; prepared for the 11th Aeroacoustics Conference cosponsored by the American Institute of Aeronautics and Astronautics and the Confederation of European Aerospace Societies, Monterey, California, May 23-25, 2005
- Investigations of shuttle main landing gear door environmental seals, Joshua Finkbeiner ... [and others]
- Application of an extended parabolic equation to the calculation of the mean field and the transverse and longitudinal mutual coherence functions within atmospheric turbulence, Robert M. Manning
- By different cellular mechanisms, lymphatic vessels sprout by endothelial cell recruitment whereas blood vessels grow by vascular expansion, Patricia A. Parsons-Wingerter ... [and others]
- Life prediction for a CMC component using the NASALIFE computer code, John Z. Gyekenyesi, Pappu L.N. Murthy, Subodh K. Mital
- Fluids and combustion facility, fluids integrated rack modal model correlation, Mark E. McNelis ... [and others]
- Analysis of coupled seals, secondary and powerstream flow fields in aircraft and aerospace turbomachines, M. M. Athavale, Y. H. Ho, and A. J. Przekwas
- Adapting end host congestion control for mobility, Wesley M. Eddy, Yogesh P. Swami
- NASA radioisotope power conversion technology NRA overview, David J. Anderson ; prepared for the Space Technology and Applications International Forum (STAIF-2005) sponsored by the University of New Mexico's Institute for Space and Nuclear Power Studies (UNM-ISNPS), Albuquerque, New Mexico, February 13-17, 2005
- The fuel cell powered club car carryall, Dennis J. Eichenberg
- Verification of a 2 kWe closed-Brayton-cycle power conversion system mechanical dynamics model, Damian R. Ludwiczak ... [and others] ; prepared for the Space Technology and Applications International Forum (STAIF-2005) sponsored by the University of New Mexico's Institute for Space and Nuclear Power Studies (UNM-ISNPS), Albuquerque, New Mexico, February 13-17, 2005
- Improvements to the total temperature calibration of the NASA Glenn Icing Research Tunnel, E. Allen Arrington and Jose C. Gonsalez ; prepared for the 41st Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Tucson, Arizona, July 10-13, 2005
- Courant number and mach number insensitive CE/SE euler solvers, Sin-Chung Chang
- NASA Glenn Research Center program in high power density motors for aeropropulsion, Gerald V. Brown ... [and others]
- Stirling analysis comparison of commercial versus high-order methods, Rodger W. Dyson ... [and others] ; prepared for the Third International Energy Conversion Engineering Conference sponsored by the American Institute of Aeronautics and Astronautics, San Francisco, California, August 15-18, 2005
- Rotating rake turbofan duct mode measurement system, Daniel L. Sutliff ; prepared for NOISE-CON 2005 sponsored by the Institute of Noise Control Engineering, Minneapolis, Minnesota, October 17-19, 2005
- Design study of wafer seals for future hypersonic vehicles, Patrick H. Dunlap ... [and others] ; prepared for the 41st Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Tucson, Arizona, July 10-13, 2005
- Combustion synthesis of Sm0.5Sr0.5CoO3-x and La0.6Sr0.4CoO3-x nanopowders for solid oxide fuel cell cathodes, Narottam P. Bansal, Zhimin Zhong
- Planar Inlet Design and Analysis Process (PINDAP), John W. Slater, Christopher R. Gruber
- Computational study of separating flow in a planar subsonic diffuser, Teryn DalBello, Vance Dippold III and Nicholas J. Georgiadis
- Utilizing radioisotope power system waste heat for spacecraft thermal management, David R. Pantano ... [and others] ; prepared for the Third International Energy Conversion Engineering Conference sponsored by the American Institute of Aeronautics and Astronautics, San Francisco, California, August 15-18, 2005
- Computational simulation of damage propagation in three-dimensional woven composites, Dade Huang and Levon Minnetyan ; prepared under grant NAG3-1101
- Search for effects of an electrostatic potential on clocks in the frame of reference of a charged particle, Harry I. Ringermacher, Mark S. Conradi, Brice N. Cassenti ; prepared for the 37th Joint Propulsion Conference and Exhibit cosponsored by the AIAA, SAE, AIChE, and ASME Salt Lake City, Utah, July 8-11, 2001
- Advanced electrical materials and components development --an update, Gene E. Schwarze ; prepared for the Third International Energy Conversion Engineering Conference sponsored by the American Institute of Aeronautics and Astronautics, San Francisco, California, August 15-18, 2005
- Low conductivity thermal barrier coatings, Dongming Zhu
- Intelligent elements for the ISHM Testbed and Prototypes (ITP) Project, William A. Maul ... [and others]
- The fluids and combustion facility, enabling the exploration of space, Karen J. Weiland ... [and others] ; prepared for the 56th International Astronautical Congress sponsored by the Japan Aerospace Exploration Agency, Fukuoka, Japan, October 17-21, 2005
- A design of a modular GPHS-Stirling power system for a Lunar habitation module, Paul C. Schmitz, L. Barry Penswick, Richard K. Shaltens ; prepared for the Third International Energy Conversion Engineering Conference sponsored by the American Institute of Aeronautics and Astronautics, San Francisco, California, August 15-18, 2005
- The effect of 17-4 PH stainless steel on the lifetime of a Pennzane® lubricated microwave limb sounder antenna actuator assembly ball screw for the AURA spacecraft, William R. Jones, Jr. ... [and others] ; prepared for the 11th European Space Mechanisms and Tribology Symposium cosponsored by ESA, SSIG, SSO, and CNES, Lucerne, Switzerland, September 21-23, 2005
- Static and turn-on switching characteristics of 4H-Silicon Carbide SITs to 200 °C, Janis M. Niedra, Gene E. Schwarze ; prepared for the Third International Energy Conversion Engineering Conference sponsored by the American Institute of Aeronautics and Astronautics, San Francisco, California, August 15-18, 2005
- Hydrogen-oxygen PEM regenerative fuel cell development at the NASA Glenn Research Center, David J. Bents ... [and others] ; prepared for the 2005 Fuel Cell Seminar cosponsored by Ansaldo Fuel Cells, Ballard Power Systems, Incorporated, Ohio Means Business, Hydrogen and Fuel Cell Letter, Acta, Engelhard Corporation, Entegris, Incorporated, W.L. Gore and Associates, Incorporated, Umicore Autocat USA, Incorporated, Nextech Materials, Columbian Chemicals Company, Sud-Chemie, Tanaka Precious Metals Group, Siemens, Poly Fuel, and U.S. Fuel Cell Council, Palm Springs, California, November 14-18, 2005
- System study technology assessment and prioritizing, General Electric Aircraft Engines
- Ejector enhanced pulsejet based pressure gain combustors, an old idea with a new twist, Daniel E. Paxson, Kevin T. Dougherty
- Hydrodynamics of packed bed reactor in low gravity, Brian J. Motil and Henry K. Nahra, Vemuri Balakotaiah
- NASALIFE--component fatigue and creep life prediction program, John Z. Gyekenyesi, Pappu L.N. Murthy, Subodh K. Mital
- Assessing potential propulsion breakthroughs, Marc G. Millis ; prepared for the New Trends in Astrodynamics and Applications II, An International Conference sponsored by NASA Headquarters and Princeton University, Princeton, New Jersey, June 3-5, 2005
- Solid hydrogen experiments for atomic propellants, particle formation, imaging, observations, and analyses, Bryan Palaszewski ; prepared for the 39th Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE Huntsville, Alabama, July 20-23, 2003
- An automatic phase-change detection technique for colloidal hard sphere suspensions, Mark McDowell, Elizabeth Gray, Richard B. Rogers
- Intelligent engine systems work element 1.2, malfunction and operator error reduction, Matthew Wiseman
Outgoing Resources
- Provider agent1
- Provider place1