National Aeronautics and Space Administration, Glenn Research Center, Cleveland, Ohio, 2013
Date
2013
Label
National Aeronautics and Space Administration, Glenn Research Center, Cleveland, Ohio, 2013
Name
National Aeronautics and Space Administration, Glenn Research Center
Place
Cleveland, Ohio
Provider place
Incoming Resources
- Publication of47
- Fracture analysis of particulate reinforced metal matrix composites, James B. Min, James A. Cornie
- Improved subcell model for the prediction of braided composite response, Christopher R. Cater [and three others]
- Effects of microstructural parameters on creep of nickel-base superalloy single crystals, Rebecca A. MacKay, Timothy P. Gabb, and Michael V. Nathal
- GRC GSFC TDRSS waveform metrics report, Dale J. Mortensen
- Structure of the small amplitude motion on transversely sheared mean flows, Marvin E. Goldstein and Mohamed Z. Afsar, Stewart J. Leib
- Evaluation of data-logging transducer to passively collect pressure vessel p/T history, Stephen P. Wnuk, Son Le, Raymond A. Loew
- Advanced shock position control for mode transition in a turbine based combined cycle engine inlet model, Jeffrey T. Csank and Thomas J. Stueber
- Shock position control for mode transition in a turbine based combined cycle engine inlet model, Jeffrey T. Csank and Thomas J. Stueber
- Continued evaluation of gear condition indicator performance on rotorcraft fleet, Irebert R. Delgado [and three others]
- Long hole film cooling dataset for CFD development, Vikram Shyam [and five others], Part 1
- Buckling testing and analysis of honeycomb sandwich panel arc segments of a full-scale fairing barrel, David E. Myers and Evan J. Pineda [and three others]
- Microbiological validation of the IVGEN system, David A. Porter
- Wind-US code contributions to the first AIAA Shock Boundary Layer Interaction Prediction Workshop, Nicholas J. Georgiadis, Manan A. Vyas, and Dennis A. Yoder
- Levitation performance of two opposed permanent magnet pole-pair separated conical bearingless motors, Peter Kascak [and four others]
- Solar simulation for the CREST preflight thermal-vacuum test at B-2, Richard C. Robert A. Ziemke
- Advanced space radiation detector technology development, John D. Wrbanek, Susan Y. Wrbanek, and Gustave C. Fralick
- Aero-thermal calibration of the NASA Glenn Icing Research Tunnel (2012 tests), Christine Pastor-Barsi and E. Allen Arrington
- Validation of a CFD methodology for variable speed power turbine relevant conditions, Ali A. Ameri, Paul W. Giel, Ashlie B. McVetta
- Simulating global AeroMACS airport ground station antenna power transmission limits to avoid interference with mobile satellite service feeder uplinks, Jeffrey D. Wilson
- Exhaust nozzle plume and shock wave interaction, Raymond S. Castner, Alaa Elmiligui, Susan Cliff
- Temperature and species measurements of combustion produced by a 9-point lean direct injector, Sarah A. Tedder and Yolanda R. Hicks, Randy J. Locke
- A concept of operations for an integrated vehicle health assurance system, Gary W. Hunter [and eight others]
- Advanced concept studies for supersonic commercial transports entering service in the 2018 to 2020 period, phase I final report, John Morgenstern [and four others]
- Space power facility, capabilities for space environmental testing within a single facility, Richard N. Sorge
- Micromechanics fatigue damage analysis modeling for fabric reinforced ceramic matrix composites, J.B. Min, D. Xue and Y. Shi
- Issues and strategies in solving multidisciplinary optimization problems, Surya Patnaik
- AeroMACS system characterization and demonstrations, Robert J. Kerczewski and Rafael D. Apaza, Robert P. Dimond
- Aircraft turbine engine control research at NASA Glenn Research Center, Sanjay Garg
- Combined experimental and numerical simulations of thermal barrier coated turbine blades erosion, Awatef Hamed [and five others]
- Aerodynamic classification of swept-wing ice accretion, Andy P. Broeren, Jeff M. Diebold and Michael B. Bragg
- Characterizing the in-phase reflection bandwidth theoretical limit of artificial magnetic conductors with a transmission line model, Yunsong Xie [and five others]
- Motorized beam alignment of a commercial x-ray diffractometer, Noah R. Van Zandt and James F. Myers, Richard B. Rogers
- Time-filtered Navier-Stokes approach and emulation of turbulence-chemistry interaction, Nan-Suey Liu and Thomas Wey, Tsan-Hsing Shih
- Quantifying effects of voids in woven ceramic matrix composites, Marlana B. Goldsmith [and three others]
- High efficiency traveling-wave tube power amplifier for ka-band software defined radio on International Space Station, a platform for communications technology development, Rainee N. Simons, Dale A. Force, and Thomas J. Kacpura
- Green planet architecture, methodology for self-sustainable distributed renewable energy ecosystems, Nikita T. Saxena [and four others]
- Acoustic performance of drive rig mufflers for model scale engine testing, David B. Stephens
- Model verification and validation concepts for a probabilistic fracture assessment model to predict cracking of knife edge seals in the space shuttle main engine high pressure oxidizer, Shantaram S. Pai, David S. Riha
- Impact testing of aluminum 2024 and titanium 6A1-4V for material model development, J. Michael Pereira [and three others]
- Overview of the MISSE 7 polymers and zenith polymers experiments after 1.5 years of space exposure, Grace T. Yi [and five others]
- Validation of helicopter gear condition indicators using seeded fault tests, Paula Dempsey, E. Bruce Brandon
- Stochastic nonlinear response of woven CMCs, Kuang C. Liu, Steven M. Arnold
- Aeromechanics analysis of a boundary layer ingesting fan, Milind A. Bakhle [and four others]
- Development of hyperspectral remote sensing capability for the early detection and monitoring of harmful algal blooms (HABs) in the Great Lakes, John Lekki [and six others]
- Low temperature creep of hot-extruded near-stoichiometric NiTi shape memory alloy, S.V. Raj and R.D. Noebe
- Overview of the habitat demonstration unit power system integration and operation at Desert RATS 2010, Anthony J. Colozza [and three others]
- Glove-Enabled Computer Operations (GECO), design and testing of an extravehicular activity glove adapted for human-computer interface, Richard J. Adams [and seven others]
Outgoing Resources
- Provider agent1
- Provider place1