ASME Turbo Expo, 2010, Glasgow, Scotland, U.K
Date
2010
Label
ASME Turbo Expo, 2010, Glasgow, Scotland, U.K
Name
ASME Turbo Expo
Place
Glasgow, Scotland, U.K
Actions
Incoming Resources
- Contributor of14
- Optical characterization of a multipoint lean direct injector for gas turbine combustors, velocity and fuel drop size measurements, Christopher M. Heath ... [and others] ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010
- Materials and structures research for gas turbine applications within the NASA subsonic fixed wing project, Janet Hurst
- Transition in gas turbine control system architecture, modular, distributed, and embedded, Dennis Culley ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010
- A new analysis tool assessment for rotordynamic modeling of gas foil bearings, Samuel A. Howard, Luis San Andres ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010
- Remaining technical challenges and future plans for oil-free turbomachinery, Christopher DellaCorte and Robert J. Bruckner ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010
- An assessment of gas foil bearing scalability and the potential benefits to civilian turbofan engines, Robert J. Bruckner ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers, Glasgow, Scotland, United Kingdom, June 14-18, 2010
- Phased array noise source localization measurements of an F404 nozzle plume at both full and model scale, Gary G. Podboy, James E. Bridges, and Brenda S. Henderson ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010
- Results of an advanced fan stage operating over a wide range of speed and bypass ratio, Kenneth L. Suder [and five others]
- Experimental methodology for determining turbomachinery blade damping using magnetic bearing excitation and non-contacting optical measurements, Andrew J. Provenza, Kirsten P. Duffy ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010
- Sensor and actuator needs for more intelligent gas turbine engines, Sanjay Garg ... [and others] ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME) Glasgow, Scotland, United Kingdom, June 14-18, 2010
- A data filter for identifying steady-state operating points in engine flight data for condition monitoring applications, Donald L. Simon and Jonathan S. Litt ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010
- Data quality assurance for supersonic jet noise measurements, Clifford A. Brown, Brenda S. Henderson, and James E. Bridges ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010
- Experimental and modeling studies of the combustion characteristics of conventional and alternative jet fuels final report, Ellen Meeks ... [and others] ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010
- Evolution of combustion-generated particles at tropospheric conditions, Kathleen M. Tacina and Christopher M. Heath ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010