National Aeronautics and Space Administration, Glenn Research Center, Cleveland, Ohio, 2009
Date
2009
Label
National Aeronautics and Space Administration, Glenn Research Center, Cleveland, Ohio, 2009
Name
National Aeronautics and Space Administration, Glenn Research Center
Place
Cleveland, Ohio
Provider place
Incoming Resources
- Axial and centrifugal compressor mean line flow analysis method, Joseph P. Veres ; prepared for the 47th Aerospace Sciences Meeting sponsored by the American Institute of Aeronautics and Astronautics, Orlando, Florida, January 5-8, 2009
- Alloy design challenge, development of low density superalloys for turbine blade applications, Rebecca A. MacKay ... [and others]
- NASA PS400, a new high temperature solid lubricant coating for high temperature wear applications, C. DellaCorte and B.J. Edmonds
- Interference-fit life factors for roller bearings, Fred B. Oswald and Erwin V. Zaretsky, Joseph V. Poplawski
- Windage power loss in gas foil bearings and the rotor-stator clearance of high speed generators operating in high pressure environments, Robert J. Bruckner ; prepared for the ASME Turbo Expo 2009 sponsored by ASME, Orlando, Florida, June 8-12, 2009
- A review of state-of-the-art separator materials for advanced lithium-based batteries for future aerospace missions, Richard S. Baldwin
- Simulated tip rub testing of low-density metal foam, Cheryl L. Bowman, Michael G. Jones
- Noise-source separation using internal and far-field sensors for a full-scale turbofan engine, Lennart S. Hultgren and Jeffrey H. Miles ; prepared for the 15th Aeroacoustics Conference (30th AIAA Aeroacoustics Conference) cosponsored by AIAA and CEAS, Miami, Florida, May 11-13, 2009
- Orion Service Module Reaction Control System plume impingement analysis using PLIMP/RAMP2, Xiao-Yen J. Wang ... [and others] ; prepared for the 47th AIAA Aerospace Sciences Meeting and Exhibit sponsored by the American Institute of Aeronautics and Astronautics, Orlando, Florida, January 5-8, 2009
- A systematic approach to sensor selection for aircraft engine health estimation, Donald L. Simon and Sanjay Garg ; prepared for the 19th ISABE Conference (ISABE 2009) sponsored by the International Society for Air Breathing Engines, Montreal, Canada, September 7-11, 2009
- Meteoroid and orbital debris threats to NASA's docking seals, initial assessment and methodology, Henry C. de Groh III, Christopher A. Gallo, and Henry K. Nahra ; prepared for the 1st Atmospheric and Space Environments Conference sponsored by the American Institute of Aeronautics and Astronautics, San Antonio, Texas, June 22-25, 2009
- History of thermal barrier coatings for gas turbine engines, emphasizing NASA's role from 1942 to 1990, Robert A. Miller
- Failure analysis of sapphire refractive secondary concentrators, Jonathan A. Salem, George D. Quinn
- Design of a Glenn Research Center solar field grid-tied photovoltaic power system, Dennis J. Eichenberg
- Analysis of electromagnetic wave propagation in a magnetized re-entry plasma sheath via the kinetic equation, Robert M. Manning
- Wind-US user's guide, Charles E. Towne
- Analysis of stationary photovoltaic-based surface power system designs at the lunar south pole, Joshua E. Freeh
- NASA Lunar Dust Filtration and Separations Workshop report, Juan H. Agui and Dennis P. Stocker
- Advanced noise control fan aerodynamic performance, Richard F. Bozak, Jr
- Development of a reactor model for chemical conversion of Lunar regolith, U. Hegde and R. Balasubramaniam, S. Gokoglu ; prepared for the Space Technology and Applications International Forum (STAIF-2007) sponsored by the The Institute for Space and Nuclear Power Studies at the University of New Mexico, Albuquerque, New Mexico, February 11-14, 2007
- Analysis of thermal and reaction times for hydrogen reduction of lunar regolith, U. Hegde and R. Balasubramaniam, S. Gokoglu ; prepared for the Space Technology and Applications International Forum (STAIF-2008) sponsored by the Institute for Space and Nuclear Power Studies at the University of New Mexico, Albuquerque, New Mexico, February 10-14, 2008
- Halophytes, algae, and bacteria food and fuel feedstocks, R. C. Hendricks, D.M. Bushnell
- Experimental investigation of the application of microramp flow control to an oblique shock interaction, Stefanie M. Hirt and Bernhard H. Anderson ; prepared for the 47th Aerospace Sciences Meeting sponsored by the American Institute of Aeronautics and Astronautics, Orlando, Florida, January 5-8, 2009
- Experimental investigations of Space Shuttle BX-265 foam, B.A. Lerch and R.M. Sullivan
- Regolith activation on the Lunar surface and its ground test simulation, James R. Gaier ; prepared for the 39th International Conference on Environmental Systems (ICES) sponsored by the Society of Automotive Engineers International, Savannah, Georgia, July 12-16, 2009
- A brief survey of media access control, data link layer, and protocol technologies for Lunar surface communications, comparison, Thomas M. Wallett
- Phase fluctuations at goldstone derived from 1-year site testing interferometer data, James A. Nessel and Roberto J. Acosta, David D. Morabito
- Effects of thermal exposure on the optical properties of LORD Aeroglaze A276, David L. Ellis and Donald A. Jaworske
- Biofuels as an alternative energy source for aviation, a survey, Bilal M. McDowell Bomani ... [and others]
- COMPASS final report, Near Earth Asteroids Rendezvous and Sample Earth Returns (NEARER), Steven R. Oleson and Melissa L. McGuire ; prepared for the Near Earth Asteroids Rendezvous and Sample Earth Returns (NEARER) sponsored by the 31st International Electric Propulsion Conference, Ann Arbor, Michigan, September 20-24, 2009
- Effects of hypervelocity impacts on silicone elastomer seals and mating aluminum surfaces, Henry C. de Groh III and Bruce M. Steinetz ; prepared for the 45th Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Denver, Colorado, August 2-8, 2009
- Ultra high power and efficiency space traveling-wave tube amplifier power combiner with reduced size and mass for NASA missions, Rainee N. Simons ... [and others]
- Impact testing on reinforced carbon-carbon flat panels with ice projectiles for the space shuttle return to flight program, Matthew E. Melis ... [and others]
- Investigation of liquid metal heat exchanger designs for fission surface power, Rodger W. Dyson ... [and others] ; prepared for the Sixth International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Cleveland, Ohio, July 28-30, 2008
- Lunar Regenerative Fuel Cell (RFC) reliability testing for assured mission success, David J. Bents
- Impact testing on reinforced carbon-carbon flat panels with BX-265 and PDL-1034 external tank foam for the Space Shuttle return to flight program, Matthew E. Melis ... [and others]
- Large eddy simulation of transonic flow field in NASA rotor 37, Chunill Hah ; prepared for the 47th Aerospace Sciences Meeting sponsored by the American Institute of Aeronautics and Astronautics, Orlando, Florida, January 5-8, 2009
- Data processing for atmospheric phase interferometers, Roberto J. Acosta and James A. Nessel, David D. Morabito
- Compressor study to meet large civil tilt rotor engine requirements, Joseph P. Veres ; prepared for the 65th Annual Forum and Technology Display sponsored by the American Helicopter Society, Grapevine, Texas, May 27-29, 2009
- Development and testing of a prototype grid-tied photovoltaic power system, Dennis J. Eichenberg
- Compilation of trade studies for the Constellation Program Extravehicular Activity Spacesuit power system, James Fincannon
- Integrated high payoff rocket propulsion technology (IHPRPT) SiC recession model, E.J. Opila
- Simulating bone loss in microgravity using mathematical formulations of bone remodeling, James A. Pennline
- The development of wheels for the Lunar Roving Vehicle, a survey, Vivake Asnani, Damon Delap, and Colin Creager
- Supporting technology at GRC to mitigate risk as Stirling power conversion transitions to flight, Jeffrey G. Schreiber, Lanny G. Thieme, and Wayne A. Wong ; prepared for the Sixth International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Cleveland, Ohio, July 28-30, 2008
- An experimental evaluation of the performance of two combination pitot pressure probes, David J. Arend and John D. Saunders ; prepared for the 47th Aerospace Sciences Meeting sponsored by the American Institute of Aeronautics and Astronautics, Orlando, Florida, January 5-8, 2009
- Effect of illumination angle on the performance of dusted thermal control surfaces in a simulated Lunar environment, James R. Gaier ; prepared for the 39th International Conference on Environmental Systems (ICES) sponsored by the Society of Automotive Engineers International, Savannah, Georgia, July 12-16, 2009
- Development and testing of the Glenn Research Center Visitor's Center grid-tied photovoltaic power system, Dennis J. Eichenberg
- Stirling convertor control for a concept rover at NASA Glenn Research Center, Gina M. Blaze-Dugala ; prepared for the Sixth International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Cleveland, Ohio, July 28-30, 2008
- Integrity of the plasma magnetic nozzle, Richard A. Gerwin
Outgoing Resources
- Provider agent1
- Provider place1