National Aeronautics and Space Administration, Glenn Research Center, Cleveland, Ohio, 2006
Date
2006
Label
National Aeronautics and Space Administration, Glenn Research Center, Cleveland, Ohio, 2006
Name
National Aeronautics and Space Administration, Glenn Research Center
Place
Cleveland, Ohio
Provider place
Incoming Resources
- Investigation of tapered roller bearing damage detection using oil debris analysis, Paula J. Dempsey, Gary Kreider and Thomas Fichter ; prepared for the 2006 Aerospace Conference sponsored by the Institute of Electrical and Electronics Engineers Big Sky, Montana, March 4-11, 2006
- Conjugate heat transfer analyses on the manifold for ramjet fuel injectors, Xiao-Yen J. Wang ; prepared for the Thermal and Fluids Analysis Workshop (TFAWS) 2006 sponsored by the University of Maryland College Park and NASA Goddard Space Flight Center College Park, Maryland, August 7-11, 2006
- Extended operation of Stirling convertors in a thermal vacuum environment, Salvatore M. Oriti ; prepared for the Third International Energy Conversion Engineering Conference sponsored by the American Institute of Aeronautics and Astronautics, San Francisco, California, August 15-18, 2005
- Rotorcraft health management issues and challenges, James J. Zakrajsek ... [and others] ; prepared for the First International Forum on Integrated System Health Engineering and Management in Aerospace cosponsored by NASA Ames Research Center and NASA Marshall Space Flight Center, Napa, California, November 7-10, 2005
- Fast turn-off times observed in experimental 4H SiC thyristors, Janis M. Niedra
- Aerosol-assisted chemical vapor deposited thin films for space photovoltaics, Aloysius F. Hepp ... [and others] ; prepared for the Fourth International Energy Conversion Engineering Conference and Exhibit (IECEC) sponsored by the American Institute of Aeronautics and Astronautics San Diego, California, June 26-29, 2006
- Heat rejection concepts for lunar fission surface power applications, John Siamidis
- Life limiting behavior in interlaminar shear of continuous fiber-reinforced ceramic matrix composites at elevated temperatures, Sung R. Choi ... [and others]
- Simulated data for high temperature composite design, Christos C. Chamis, Galib H. Abumeri
- Two phase flow modeling, summary of flow regimes and pressure drop correlations in reduced and partial gravity, R. Balasubramaniam ... [and others]
- Characterization of a high current, long life hollow cathode, Jonathan L. Van Noord, Hani Kamhawi, and Heather K. McEwen ; prepared for the 29th International Electric Propulsion Conference sponsored by ERPS, Princeton University, NASA Glenn, NASA Jet Propulsion Laboratory, Aerojet, EPPDYL, IEPC, Busek Company, Incorporated, and Mitsubishi Electric Princeton, New Jersey, October 31-November 4, 2005
- Update on extended operation of Stirling convertors in thermal vacuum at NASA Glenn Research Center, Salvatore M. Oriti
- Model-based self-tuning multiscale method for combustion control, Dzu K. Lee ... [and others]
- Stability limits of a PD controller for a flywheel supported on rigid rotor and magnetic bearings, Albert F. Kascak ... [and others]
- High-strain-rate compression testing of ice, Mostafa Shazly and Vikas Prakash, Bradley A. Lerch
- Composite erosion by computational simulation, Christos C. Chamis
- Latest developments in SLD scaling, Jen-ching Tsao and David N. Anderson ; prepared for the Fourth Theoretical Fluid Mechanics Meeting sponsored by the American Institute of Aeronautics and Astronautics, Toronto, Ontario, Canada, June 6-9, 2006
- NPSS multidisciplinary integration and analysis, Edward J. Hall ... [and others]
- Assessments of mechanical and life limiting properties of two candidate silicon nitrides for stirling convertor heater head applications, Sung R. Choi, David L. Krause
- Experimental results of thin-film photovoltaic cells in a low density of LEO plasma environment, ground tests, Joel T. Galofaro and Boris V. Vayner
- Further assessment of MVD effects in SLD applications, Jen-Ching Tsao and David N. Anderson ; prepared for the 43rd Aerospace Sciences Meeting and Exhibit sponsored by the American Institute of Aeronautics and Astronautics, Reno, Nevada, January 10-13, 2005
- Observations of a cast cu-cr-zr alloy, David L. Ellis
- Computer aided design of Ka-band waveguide power combining architectures for interplanetary spacecraft, Karl R. Vaden
- Comparison of balloonsonde and remote sensing atmospheric measurements, David J. Brinker and Andrew L. Reehorst, Jack Power ; prepared for the 11th Conference on Aviation, Range, and Aerospace Meteorology sponsored by the American Meteorological Society, Hyannis, Massachusetts, October 4-8, 2004
- Seal investigations of an active clearance control system concept, Bruce M. Steinetz ... [and others]
- Assessments of fracture toughness of monolithic ceramics, SEPB versus SEVNB methods, Sung R. Choi, John P. Gyekenyesi
- Micro-energy rates for damage tolerance and durability of composite structures, Christos C. Chamis, Levon Minnetyan ; prepared for the 16th European Conference on Fracture cosponsored by ASTM, JSEM, SMS, BSSM, AIAS, SEM, and EURASEM, Alexandroupolis, Greece, July 3-7, 2006
- Turbulent chemical interaction models in NCC, comparison, Andrew T. Norris, Nan-Suey Liu
- Mechanical characterization of ZnSe windows for use with the flow enclosure accommodating novel investigations in combustion of solids (FEANICS) module, Jonathan A. Salem
- Summary of Stirling convertor testing at NASA Glenn Research Center, Jeffrey G. Schreiber ; prepared for the Fourth International Energy Conversion Engineering Conference and Exhibit (IECEC) sponsored by the American Institute of Aeronautics and Astronautics San Diego, California, June 26-29, 2006
- Application of composite mechanics to composites enhanced concrete structures, Christos C. Chamis, Pascal K. Gotsis ; prepared for the 16th European Conference of Fracture cosponsored by ESIS, ASTM, SMS, AIAS, JSEM, BSSM, SEM, and EURASEM, Alexandroupolis, Greece, July 3-7, 2006
- A current source method for tq measurement of fast switching thyristors, Janis M. Niedra
- Burst testing and analysis of superalloy disks with a dual grain microstructure, John Gayda and Pete Kantzos
- Performance and operational characteristics for a dual Brayton space power system with common gas inventory, Paul K. Johnson, Lee S. Mason ; prepared for the Fourth International Energy Conversion Engineering Conference and Exhibit (IECEC) sponsored by the American Institute of Aeronautics and Astronautics San Diego, California, June 26-29, 2006
- Rate-based model predictive control of turbofan engine clearance, Jonathan A. DeCastro
- The 2kW Mini-BRU electrical controls concept and transient performance, Arthur G. Birchenough
- Stabilizing gyroscopic modes in magnetic-bearing-supported flywheels by using cross-axis proportional gains, Gerald V. Brown ... [and others] ; prepared for the Guidance, Navigation, and Control Conference and Exhibit sponsored by the American Institute of Aeronautics and Astronautics, San Francisco, California, August 15-18, 2005
- Slow crack growth and fracture toughness of sapphire for the International Space Station Fluids and Combustion Facility, Jonathan A. Salem
- A comparison of coolant options for Brayton power conversion heat rejection systems, John Siamidis, Lee S. Mason ; prepared for the Space Technology and Applications International Forum (STAIF-2006) sponsored by the University of New Mexico's Institute for Space and Nuclear Power Studies (UNM-ISNPS) Albuquerque, New Mexico, February 12-16, 2006
- Switching characteristics of a 4H-SiC based bipolar junction transistor to 200 °C, Janis M. Niedra
- A method for calculating viscosity and thermal conductivity of a helium-xenon gas mixture, ground tests, Paul K. Johnson
- Comprehensive report of fan performance from duct rake instrumentation on 1.294 pressure ratio, 806 ft/sec tip speed turbofan simulator models, Robert J. Jeracki
- Flow and noise control in high speed and high Reynolds number jets using plasma actuators, M. Samimy ... [and others] ; prepared for the Third Flow Control Conference sponsored by the American Institute of Aeronautics and Astronautics, San Francisco, California, June 5-8, 2006
- Application of the Bootstrap statistical method in deriving vibroacoustic specifications, William O. Hughes, Thomas L. Paez ; prepared for the Ninth International Conference on Recent Advances in Structural Dynamics sponsored by the Institute of Sound and Vibration Research, Southampton, United Kingdom, July 17-19, 2006
- Acoustic efficiency of azimuthal modes in jet noise using chevron nozzles, Clifford A. Brown and James Bridges
- A three-dimensional unsteady CFD model of compressor stability, Rodrick V. Chima ; prepared for Turbo Expo 2006 sponsored by the American Society of Mechanical Engineers, Barcelona, Spain, May 8-11, 2006
- High power ECR ion thruster discharge characterization, John E. Foster ... [and others] ; prepared for the 29th International Electric Propulsion Conference sponsored by ERPS, Princeton University, NASA Glenn, NASA Jet Propulsion Laboratory, Aerojet, EPPDyL, IEPC, ESA, Busek Company, Incorporated, Mitsubishi Electric, and the Air Force Office of Scientific Research Princeton, New Jersey, October 31-November 4, 2005
- Feasibility study of Jupiter Icy Moons Orbiter permanent magnet alternator start sequence, Barbara H. Kenny, Roger P. Tokars
- Ion beam characterization of a NEXT multi-thruster array plume, Eric J. Pencil ... [and others]
- On whether angular momentum in electric and magnetic fields radiates to infinity, Francis X. Canning and Steven Knudsen
Outgoing Resources
- Provider agent1
- Provider place1